Get The Most Out Of Your Tyre Service In Perth With These Tips

The average lifespan of a car tyre is six years, although this can vary depending on the type of vehicle, the driving conditions, and the way the tyre is maintained. A tyre service in Perth should be carried out every year to ensure that the tyres are in good condition and to prevent any problems from developing.

A tyre service usually involves a visual inspection of the tyres, as well as a tread depth check and a pressure check. The tyres will also be cleaned, and any old or damaged tyres will be replaced.

If you want to get the most out of your tyre service, there are a few things you can do. Read on for 8 tips that will help you get the most out of your tyre service!

  • Make sure your tyres are inflated to the correct pressure:

Under-inflated or over-inflated tyres can both cause problems. Under-inflated tyres can cause uneven wear on the tyre, while over-inflated ones can increase fuel consumption and reduce handling performance. It’s important to check and adjust the pressure of your tyres regularly, especially if you drive in extreme conditions like heavy rain or snow.

  • Check the tread on your tyres:

You should always check for signs of damage and wear when you have your car serviced, including checking the tread depth on your tyres. If there is less than 1.6mm of tread remaining on any part of a tyre that is exposed to the road, it should be replaced immediately, as this could lead to sudden deflation and loss of control of your vehicle.

If there is less than 3mm of tread remaining across any part of a tyre that is exposed to the road, it should be replaced immediately, too, as this could lead to an accident and serious injuries.

  • Watch out for any potential problems:

If you notice any problems with your tyres, such as bulging, cracks or cuts, then it’s important to have them repaired immediately. A bulge in the sidewall of a tyre can be caused by underinflation or overloading the vehicle. Cracks and cuts can be caused by hitting something on the road, such as a pothole or curb. If you notice any problems with your tyres, make sure that they’re repaired as soon as possible.

  • Check the alignment of your wheels:

Alignment refers to how straight your vehicle is running, and an alignment will ensure that all four wheels are pointing in the same direction and at the same angle. This helps to improve handling and stability while driving, which in turn reduces fuel consumption and tyre wear.

If you notice that one of your wheels is pointing in a different direction from the others, then this could be causing problems with your tyres, and it may be time to book a tyre service!

  • Check the balance of your wheels:

The next thing that you need to do is check the balance of your wheels. This is important because if your wheels are out of balance, it will affect the handling of your car, which could be dangerous. To check that your wheels are balanced, place a coin on each wheel while they’re spinning at high speed. If one side is heavier than the other, then this means that there’s a problem with the wheel itself. If this is the case, then you should bring your vehicle to a motor technician for further inspection.

  • Clean your tyres:

Another thing that you should do is clean your tyres. This will ensure that all of the dirt and grime is removed from the surface of the tyre. You can use a brush or sponge to clean them, but don’t use anything abrasive because it could damage them. After cleaning them, it’s best if you dry them off with a towel or cloth so that they don’t attract any more dirt when they’re exposed to water during driving conditions.


Tyre service in Perth is essential for any driver, and following these tips can help prolong the life of your tyres.